Towertalk
[Top] [All Lists]

[Towertalk] Re: SteppIR Yagi Question

To: <towertalk@contesting.com>
Subject: [Towertalk] Re: SteppIR Yagi Question
From: dhearn@ix.netcom.com (dan hearn)
Date: Thu, 19 Dec 2002 12:26:34 -0800
Dick, failure of the parasitic element(s) should result in a poor f/b
ratio. I would make a check with a local friend of f/b when the ant is
first installed and use that as a reference. SWR is useless as an
indicator unless a large change from a previously noted value occurs.
Even then, f/b and possibly f/s ratio will give you a good reference.
The test station should preferably not be too far away. You can tell a
lot from f/b on distant stations. 73, Dan, N5AR

RLVZ@aol.com wrote:
> 
> If the SteppIR driven element motor does it's job and adjusts the driven
> element length properly... but either the director or reflector motor quits
> and does not adjust it's length accordingly for the freq. you are on... do
> you think the operator will know that the antenna has a problem... or will it
> continue to resonate properly and give a low SWR reading giving the operator
> the false idea that all elements are tuned for the frequency when actually
> they may not be.
> 
> Guess I am wondering if there is a way to insure that all elements are the
> proper length.
> 
> Thanks & 73's,
> Dick- K9OM
> 
> In a message dated 12/19/02 10:27:09 AM Eastern Standard Time,
> tavan@tibco.com writes:
> 
> << towertalk@contesting.com >>
> _______________________________________________
> AN Wireless Self Supporting Towers at discounted prices,
> See http://www.mscomputer.com
> 
> Wireless Weather Stations now $349.95. Call Toll Free,
> 888-333-9041 for additional information.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>