Towertalk
[Top] [All Lists]

[TowerTalk] Ground Rods

To: <towertalk@contesting.com>
Subject: [TowerTalk] Ground Rods
From: ac5tm@bellsouth.net (Thomas Miller)
Date: Wed Jun 4 21:17:22 2003
Depends, according to some electrical inspectors if it isn't flush(top of
ground rod) with the ground there is not 8 feet in the ground.  Thus the rod
if it used for the ground with an electrical panel where required it may not
pass inspection.  I have had electrical inspectors look for this.  I do not
understand this they do not know if it is a 8, 10 or 20 foot rod just as
long as the top is below ground level.  Go figure.  I would rather have the
top out of the ground so one could check the connection without digging it
up.
Tom AC5TM
----- Original Message -----
From: "Jerry Keller" <k3bz@arrl.net>
To: "(Reflector) TowerTalk" <towertalk@contesting.com>
Sent: Wednesday, June 04, 2003 5:52 PM
Subject: [TowerTalk] Ground Rods


> Should ground rods always be sunk below the ground surface?  If so, why? I
> mean, other than to avoid the lawnmower...:-)  Jerry K3BZ
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>