What I have used in the past was a piece of 1/8" Dacron rope about 3' long.
I inserted it into the end of the element. I folded over part of the rope
and pushed the end cap on to hold the rope in place. Some say you can use a
dab of silicone glue to hold the rope in pace.
N2tK, Tony
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of VeeAthreePL
Sent: Friday, August 08, 2003 13:41
To: towertalk@contesting.com
Subject: [TowerTalk] Antenna element vibration damping - How
I have had read somewhere on this reflector that in order to damp element
vibration in the wind you have to insert rope inside the elements.
I am just about to install my Mosley TA36 with 40M kit and would like to
install such a modification. How it is done exactly?
Thanks
73 de Andy - VA3PL
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|