Towertalk
[Top] [All Lists]

RE: [TowerTalk] double figure 8 bend

To: Ted Sarah - W8TTS <tsarah@neo.rr.com>
Subject: RE: [TowerTalk] double figure 8 bend
From: Eric Scace K3NA <eric@k3na.org>
Reply-to: eric@k3na.org
Date: Mon, 25 Aug 2003 16:48:39 -0400
List-post: <mailto:towertalk@contesting.com>
Hi Ted --

   Thanks for those references.

   Perhaps they may sense in the original context of the message.  When I read 
"bend", I assumed the author was talking about
joining two ropes together, which these knots do NOT do.

   Nonetheless, it's an excellent knot to know.  I'll be substituting this for 
bowlines in the future.

   So much to learn...

-- Eric K3NA

-----Original Message-----
From: Ted Sarah - W8TTS [mailto:tsarah@neo.rr.com]
Sent: 2003 August 25 Monday 16:15
To: eric@k3na.org
Cc: Towertalk
Subject: Re: [TowerTalk] double figure 8 bend


Try these sites:

http://www.chockstone.org/TechTips/BunnyEars.htm
http://www.artex.co.jp/Pages/outdoor/ropework/pages/r_DubleFigureEightKnot.html
http://www.realknots.com/knots/sloops.htm

73 - Ted - W8TTS


Eric Scace K3NA wrote:

>    A while back Ian G3SEK mentioned in a posting:
>
> "Darrel Van Buer wrote:
>
>>Climbers seem to prefer the double figure 8 bend - it's work to tie and
>>really hard to untie, but virtually nuke-proof as far as coming undone
>>accidentally.
>>
>
> Absolutely - even in slick plastic rope after years of use, figure-of-
> eight knots still don't even think about coming loose. They have the
> advantages of a fairly straight pull out of the knot (minimizing loss of
> strength in the rope) combined with a lot of friction inside the knot. Tied 
> on a doubled-over end of rope, the figure-of-eight
makes
> a very
> strong loop. To join two ropes, tie a loose figure-of-eight on one end;
> then thread the other rope into it from the opposite end, keeping
> parallel with the first rope to make a second interlocking figure-of-
> eight."
>
>    I've done a search for "double figure 8 bend" on the web and can't find 
> any other references to this knot.
>
>    From the description, it's possible that the description is a double sheet 
> bend or a knot variously known as a Carrick bend,
> Josephine knot, or anchor bend.  When tied correctly, this appears to be a 
> very highly regarded mechanism for joining two lines
> together temporarily.  However, it must be done correctly!
>
>    Can someone clarify?
>
>    Thanks.
>
> -- Eric K3NA
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free,
1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>




_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>