Towertalk
[Top] [All Lists]

Re: [TowerTalk] Making rotator loops separate

To: <mjwetzel@comcast.net>, <K7LXC@aol.com>, <mcduffie@actcom.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Making rotator loops separate
From: "on4kj" <on4kj@skynet.be>
Date: Sun, 31 Aug 2003 21:38:38 +0200
List-post: <mailto:towertalk@contesting.com>
Hello Mike,

If you dont want  your $ to escape from your purse...... just close it, need
no pliers.
Same thing for RF    .........hi .
But I learned over the years ( Mobile Radio install and after sales
service ) to use good connectors in critical applications such as Navy-type,
not the GP PL259's.

Jos on4kj

" You can't make a silk purse out of a sow's ear. "

----- Original Message -----
From: "Mike Wetzel" <mjwetzel@comcast.net>
To: <K7LXC@aol.com>; <mcduffie@actcom.net>; <towertalk@contesting.com>
Sent: Sunday, August 31, 2003 9:06 PM
Subject: RE: [TowerTalk] Making rotator loops separate


> Steve is 100% correct on this!  I've found this necessary even inside the
> shack.  I had bad RF problems (RF getting into keyers, computers, etc) and
> it was cured by using pliers to 'gently' seat PL-259's to coax switches,
> etc.
>
> Mike W9RE
>
> > -----Original Message-----
> > From: towertalk-bounces@contesting.com
> > [mailto:towertalk-bounces@contesting.com]On Behalf Of K7LXC@aol.com
> > Sent: Sunday, August 31, 2003 12:58 PM
> > To: mcduffie@actcom.net; towertalk@contesting.com
> > Subject: Re: [TowerTalk] Making rotator loops separate
> >
> >
> > In a message dated 8/31/03 10:36:37 AM Pacific Daylight Time,
> > mcduffie@actcom.net writes:
> >
> > > > Pl-259's are notorious for coming loose anyway, and in the loop
> > environment
> > >  > you're just asking for trouble.
> > >
> > >  I've NEVER had a PL come loose on me, even the ones that weren't
> > >  taped.  I put them on as tight as my hands will do it without tools,
> > >  and that's it.  Properly installed, they shouldn't come loose with
> > >  layers of tape over them anyway.
> >
> >     Well, you've been lucky. Hand-tight is NOT recommended. Use
> > the 2-plier
> > technique to 'gently' seat them with a barrel connector and
> > 1-plier on baluns,
> > etc.
> >
> > Cheers,
> > Steve     K7LXC
> > TOWER TECH -
> > Professional tower services for commercial and amateur
> > _______________________________________________
> >
> > See: http://www.mscomputer.com  for "Self Supporting Towers",
> > "Wireless Weather Stations", and lot's more.  Call Toll Free,
> > 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>