Towertalk
[Top] [All Lists]

RE: [TowerTalk] Heat Shrinkable Tape?

To: "'Michael Tope'" <W4EF@dellroy.com>,Towertalk <towertalk@contesting.com>,Eric Rosenberg <wd3q@starpower.net>
Subject: RE: [TowerTalk] Heat Shrinkable Tape?
From: "Kolenda, Carl A" <carl.kolenda@eds.com>
Date: Tue, 9 Dec 2003 11:05:17 -0500
List-post: <mailto:towertalk@contesting.com>
The shrink tubing with the sealant/adhesive mentioned by W4ef is used in
Cable TV installations.

The brand name is: Canusa CFTV. It comes in 4 foot lengths and various
diameters from .4/.15 inch to 2.75/1.00 inch diameter ratios
(expanded/recovered).

A common size for 1/2 diameter cable is CFTV-1300 (1.3/.4) You need to slide
it over the connector and use a heat gun to shrink as needed.

Check with Anixter or Greybar or any CATV supplier.


Carl NW8Z



-----Original Message-----
From: Michael Tope [mailto:W4EF@dellroy.com] 
Sent: Monday, December 08, 2003 1:30 AM
To: Towertalk; Eric Rosenberg
Cc: Jim Lux; Don Daso
Subject: Re: [TowerTalk] Heat Shrinkable Tape?


You can buy heat shrink tubing that is coated with a
glue on the inside. Also, if your plug-to-wire aspect
ratio is greater than 2:1, there are shrink-tube products
out there that have shrink ratios greater than 2:1 (up
to 4:1 if I recall correctly). Its been a long while since I had to buy any
of this stuff, so I don't recall where we got it (this was circa 1991).
Newark or Allied is probably a good place to start.

73 de Mike, W4EF................................

----- Original Message -----
From: "Eric Rosenberg" <wd3q@starpower.net>
To: "Towertalk" <towertalk@contesting.com>
Cc: "Don Daso" <k4za@juno.com>; "Jim Lux" <jimlux@earthlink.net>
Sent: Sunday, December 07, 2003 7:58 PM
Subject: Re: [TowerTalk] Heat Shrinkable Tape?


> Thanks to all who have responded to my query. .
>
> To answer the question, "what are you trying to accomplish" --
>
> I have some pre-existing junctions and connections (patch cords) that 
> if I were to re-do would use conventional heatshrink.
>
> In lieu of re-building these cables, I was hoping to find a tape or 
> material that I could wrap around the connection and then melt/shrink 
> to both provide insulation, protection and rigidity at that junction 
> point.  I suppose I'm left with Liquid Electrical Tape.
>
> Eric W3DQ




_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>