Towertalk
[Top] [All Lists]

RE: [TowerTalk] Using riding mower to run radials (2nd Try)

To: <towertalk@contesting.com>
Subject: RE: [TowerTalk] Using riding mower to run radials (2nd Try)
From: "Chuck Dietz" <w5pr@swbell.net>
Date: Tue, 13 Apr 2004 11:06:57 -0500
List-post: <mailto:towertalk@contesting.com>
Don:  This sounds like a great device for laying radials.  Tell us more
about the blade.  Does it roll or drag through the soil?  Is it made from a
piece of plate or was it originally another attachment?  Please take photos
too...

Chuck W5PR 

It's in my garage right now, but, as I won't be home for two weeks, let me
try to describe it easily for you:

The 'bed' is made of 2X8's .. four of them .. with 2x6's making a frame
about the edge.  Overall size is about 36x30 [wider than long].
There are two eye-bolts at the front edge [for attaching to the lawn
tractor] .. and it has three pieces of tubing which go through the rear
board of the 'bed' .. 3/8" .. 1/2" .. and 1" diameter [smallest diameter at
the front].  These pieces of tubing slant slightly to the rear and have been
bent [circular arc] to the rear .. they extend about 4" below the 'bed' ...
in front of these is a 'blade' [sharpened] of thick aluminum which cuts the
groove when the 'bed' is pulled by the tractor.
Through these tubes, I can lay radials, rotor control wire, and even coax!.
Above the bed, there are two mounts which hold a spool of whatever I want to
'lay', supported on a rod, placed through the center of the spool.

There are some 'extras' .. like wheels which allow me to move it about
without having the blade cut the soil .. and handles which allow me to
maneuver it into position before beginning a 'lay'.

When I am using it, I place four 'cinder blocks' upon the bed for added
weight, to insure the blade will cut through small roots, etc.

Laid 100 radials for my 80m vertical in about an hour .. and will be doing
that again this summer ... in addition to putting four long lengths of coax
and control cable in the ground, also!

Good luck
73
Don
N8DE

> Anyone have a good design for an attachment to fit a riding mower to 
> slice the ground, put the wire down and cover it back up ???
>
> yes i am lazy :-)
>
> Dan N8DCJ
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Tax Center - File online by April 15th 
> http://taxes.yahoo.com/filing.html
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", 
> "Wireless Weather Stations", and lot's more.  Call Toll Free, 
> 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>