Towertalk
[Top] [All Lists]

Re: [TowerTalk] Mystery Hy-Gain tribander

To: Randy <rlake@webryders.net>
Subject: Re: [TowerTalk] Mystery Hy-Gain tribander
From: "Alan C. Zack" <k7acz@cox.net>
Date: Thu, 29 Apr 2004 13:22:50 -0700
List-post: <mailto:towertalk@contesting.com>
Scott said there was no matching devices on the yagi.  You say the SYS-36 has a
hairpin matching device.  I have a Mosley TA-33 that sounds very much like what
Scott is describing.  I'd suggest checking out:
http://www.mosley-electronics.com/amateur.htm
and seeing if what he has matches any of the Mosley yagis.

Randy wrote:

> My guess would be a Wilson SYS-33....try to find some pics on the net..
> I have a SYS36 - 1 trap on the driven ele.but I have a hairpin on the boom
> attached to the DE.
> Good luck
> Randy N1KWF
>
> ----- Original Message -----
> From: "Alan C. Zack" <k7acz@cox.net>
> To: "J.Hector Garcia M" <Hector@telecom1.net>
> Cc: <towertalk@contesting.com>; "Scott R." <w4pa@yahoo.com>
> Sent: Thursday, April 29, 2004 2:21 AM
> Subject: Re: [TowerTalk] Mystery Hy-Gain tribander
>
> > I agree with J. Hector.  A Mosley usually has one trap per element leg,
> where Cushcraft and Hy-Gain have two.  And Mosley has a direct connection to
> the driven element, no matching devices,
> > but I usually use a balun.
> > 73
> >
> > "J.Hector Garcia M" wrote:
> >
> > > sure not a mosley antenna ?
> > >
> > > ----- Original Message -----
> > > From: "Scott R." <w4pa@yahoo.com>
> > > To: <towertalk@contesting.com>
> > > Sent: Wednesday, April 28, 2004 7:01 PM
> > > Subject: [TowerTalk] Mystery Hy-Gain tribander
> > >
> > > > OK Towertalkers:
> > > >
> > > > I spent some time this afternoon trying to help a fellow ham figure
> out
> > > > what model a Hy-Gain tribander he's acquired (used) might be.
> > > >
> > > > It's a Hy-Gain, for sure.  I can tell by all the hardware used.
> > > >
> > > > It's a 3 el, looks like a TH3.  But, my TH3 at home has two sets of
> > > > traps on each element half, this tribander only has one set on each
> > > > element half.  There are no markings on the traps.
> > > >
> > > > There was no matching network hardware on the driven element or along
> > > > the boom.  This antenna was in the air at an SK's house and taken down
> > > > as-is.  The feedline was hoseclamped directly to each half of the
> > > > driven element.  I do know the SK who had this antenna had bought it
> > > > used himself; I am guessing that this hardware is just missing.
> > > > Maybe not?
> > > >
> > > > Any wild*ss guesses out there for me to pass along?
> > > >
> > > > Scott W4PA
> > > >
> > > >
> > > > =====

--
__________________________________________________________________________
 Alan Zack
 Amateur Radio Station K7ACZ
 Las Vegas, Nevada, USA
 Quality Engineer, The Boeing Company, Retired
 Aviation Chief Warrant Officer, U.S. Coast Guard, Retired
 U.S. Coast Guard, Always Ready, Always There
 Every hour, Every day, Around the Clock and Around the World
 SEMPER PARATUS
 http://www.gocoastguard.com/


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>