Towertalk
[Top] [All Lists]

Re: [TowerTalk] MFJ 259B vs Autek VA1

To: GALE STEWARD <k3nd@yahoo.com>,towertalk reflector <towertalk@contesting.com>
Subject: Re: [TowerTalk] MFJ 259B vs Autek VA1
From: Pete Smith <n4zr@contesting.com>
Date: Wed, 12 May 2004 13:57:50 -0400
List-post: <mailto:towertalk@contesting.com>
At 09:03 AM 5/12/2004, GALE STEWARD wrote:
I'm looking at the Autek VA1 which DOES give the sign
of the X value. Any pros & cons of this unit? It looks
smaller and easier to handle up on a tower. Don't
think it needs 10 AA batteries either!


I had an Autek RF-1 for years. Other than the somewhat flimsy plastic-cased construction (which the VA-1 appears to share), it did fine for what it was. I sold it at Dayton a couple years ago and bought the 259B, and have not regretted it for a second. In antenna applications, watching the trend in the value of X as you change frequency will pretty quickly tell you the sign. With rechargeable NiMH batteries, I leave it on trickle charge all the time, and it's ready to go whenever I am. I like the steel case, which gives me some hope that it might survive if dropped on a concrete walk. No, I wouldn't particularly enjoy taking it up the tower with me.

One thing about Autek that I think people should look hard at is their attitude toward customer service. It has been several years since I last dipped a toe in that particular pond, but back then, the watchword was "expensive and surly about it." I hope that has changed. If not, I'd prefer the MFJ.


73, Pete N4ZR
The World HF Contest Station Database
was updated on April 26, 2004
2706 contest stations at
www.pvrc.org/WCSD/WCSDsearch.htm


_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>