Try Heights Tower... www.heightstowers.com
Click on Accessories
They have a 12 foot 2" diameter 6061T6 alloy aluminum mast for $77.00... pretty
cheap... I use one and it's FB...
73, Jerry K3BZ
----- Original Message -----
From: Larry Burke WI5A
To: towertalk@contesting.com
Sent: Friday, July 23, 2004 12:41 PM
Subject: [TowerTalk] Aluminum Pipe/Tubing Needed
Looking for a 12' length of aluminum pipe/tubing 1/4" wall, 1.5" ID / 2" OD,
to use in a gin pole application. While this can be located outside my
immediate area, I was hoping someone on the list could provide a lead for a
local stock in the Houston area. Most of the Yellow Pages sources I have
tried have come up empty handed. I'd prefer not to have to look through
every scrap yard in Houston. Any locals out there with some ideas?
Related question.. Is 1/4" wall overkill for 45G? I will be using the gin
pole clamp/head from WB0W. I don't recall the wall thickness on Rohn's gin
pole design, but seem to think it was not this thick. Maybe 1/8" wall would
work?
Larry Burke WI5A
Friendswood, TX
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|