TT:
This appears to be the right time to remind the readership of the QST
article (Aug 1996) titled " Install a House-Bracketed Tower--the Right Way!
" by K1KP. It describes how one ham reinforced his upper floor and roof to
accommodate a bracketed Rohn tower.
73 de
Gene Smar AD3F
----- Original Message -----
From: "darrel" <darrel@vanbuer.net>
To: <towertalk@contesting.com>
Sent: Tuesday, August 24, 2004 1:39 PM
Subject: RE: [TowerTalk] Tower costs
>
> > How do you (generic "you") know what loads your roof will stand? How can
> you
> > be sure that a good strong wind -- 60mph, 80mph -- won't take the
antenna
> > and the tower and a section of roof -- or the whole roof -- with it?
> Alan NV8A
>
> While I don't want to over simplify, but you've got many hundreds of
square
> feet of roof and adding 5 to 15 square feet of antenna & tower. If you
> spread the forces of the tower, I can't see it going anywhere with the
roof.
>
> If you only lag-bolt the feet to roof sheeting, well bye-bye antenna in
the
> massive blow and a few small holes left behind.
>
> Darrel AK6I
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|