[TowerTalk] US Tower Answered Question on Raising Fixture

["Pat Chiles" <chilesp@adelphia.net>]

Hi Everyone,

Stan suggested that I call US Tower for guidance and I just got off the 
phone with Gary at US Towers in CA.  He says that the raising fixture is 
designed to raise the tower, mast, and antennas as long as the tower is 
nested.  This is further supported by their catalog which says:
"Both the TRS80 and 80HD are designed to be easily mounted on your tower's 
hinged T-base for quick and safe one man installation or antenna servicing."

Thank all of you for your comments on my question concerning this issue.
Pat, K8PC
----- Original Message ----- 
From: "Stan Rowe" <shrtuba@chartermi.net>
To: "Pat Chiles" <chilesp@adelphia.net>
Sent: Thursday, September 30, 2004 12:30 PM
Subject: Re: US Tower Raising Fixture - Your questions


> Another thought Pat is to try calling US Tower and see if they'll make any
> comment.  They tend to be real conservative in what they will say because 
> of
> liability questions, but maybe they can give you an idea.  It just seems 
> to
> me that the assumption in the design of the raising fixture has to be that
> the user would want to raise a tower that has a mast and antennas mounted 
> on
> it -- hence it should be able to handle the load.  But who knows, maybe 
> the
> designers assumed something else.
>
> Good luck,
> Stan - K6VWE


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk