Towertalk
[Top] [All Lists]

[TowerTalk] Conduit runs in tower base

To: towertalk@contesting.com
Subject: [TowerTalk] Conduit runs in tower base
From: Bill Ogden <ogden@us.ibm.com>
Date: Mon, 1 Nov 2004 09:54:08 -0500
List-post: <mailto:towertalk@contesting.com>



I did something similar (1.5 inch sweep in the concrete base) of a former
tower.  Big mistake.  Use at least a 3" conduit.  Schedule 40 seems to be
ideal.

I have a coax switch control cable, a rotator cable, two coax cables
(buryflex), and one SteppIR control line.  They are very small in a 3"
conduit, but pulling another cable is already a nontrivial job.  Remember
to use a very good "messenger" or "tag" or "pull" rope.  I used a 1/4"
dacron line that should stand up to moisture.  There always seems to be
condensation in the conduit.

I used two 90 degree schedule 40 turns at the antenna end and I remove
these when pulling a line.  They just sit on top of the vertical 3" conduit
that emerges from the ground.  (On my current tower, I did not embed the
conduit in the tower base.)

Bill
W2WO

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>