I've been using 24 foot, half inch wall, 2.5 inch OD aluminum masts
on all of my towers for quite a few years, with no failures or real
problems. During the recent ice storm, however, a couple of them
flexed a little more than I'd like to see (they've since sprung back).
Now that I have the opportunity to think this over, I am wondering
if it would be of any value to try to add a little more stiffness to
the existing mast by driving something into the hollow center.
I've got a 1.5 inch ID hole to work with - perhaps some pipe or
solid rod could be driven into it?
Wondering if anyone has ever tried anything like this?
- Pat
N9RV
.
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|