Towertalk
[Top] [All Lists]

[TowerTalk] Slipp-Not Clamp for rotors

To: "Towertalk" <Towertalk@contesting.com>
Subject: [TowerTalk] Slipp-Not Clamp for rotors
From: "Mark Potter" <jbpmlp@comcast.net>
Date: Tue, 1 Feb 2005 07:42:53 -0600
List-post: <mailto:towertalk@contesting.com>
Would like to get opinions on how these work.  Am using a 2" mast with a T2X 
rotor., TB-3 Thrust bearing.  Now about 12 sq. ft. load.  Going up to about 20 
sq. ft.  Had to pin the rotor to the mast to keep it from turning.

Their web site is www.consultpr.com

Reply off line if you like.  jbpmlp@comcast.net

Mark  W9UZ
Wheaton, IL
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>