I have seen several different thicknesses of Philly. All have held up fine
with the guy grips. The thicker cable is more difficult to install.
73, Keith NM5G
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Paul Baldock
Sent: Sunday, April 24, 2005 2:13 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Phillistran - Defective ?
I just received a new batch of Phillistran from TexasTowers.
This is slightly undersize at .365" instead of .375". I'm concerned this may
be an issue with the Big Grips.
Also instead of the outer being perfectly smooth as in earlier batches this
has a ripple running along it that looks like it was probably caused as it
fed through the assembly machine.
Anybody else noticed this with their Phillistran? Is this a problem?
Thanks
Paul - KW7Y
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|