Towertalk
[Top] [All Lists]

Re: [TowerTalk] Pad and Pier for ROHN SSV. Pad and Pier Foundations

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Pad and Pier for ROHN SSV. Pad and Pier Foundations
From: <isp@bnjcomp.com>
Date: Fri, 8 Jul 2005 21:44:06 -0500
List-post: <mailto:towertalk@contesting.com>
Well don't know that I need it but got a really good deal on this.  It was 9 
months old and permit was lost on it so they disassembled and I bought (with 
transportation) for abotu $5500.  So do I need it?  From what I understand my 
antennas won't even phase it but atleast I am hoping it won't come down.  I 
have two 11' omnis.    
Five 2' X 2' Flat pannels, three 3' parabolics, and four 16" X 3' sector 
antennas for just myself.  Hoping thier will be wind load left for some renters 
that have asked me to go on tower once up to help pay bills.

I do have a good hernia belt and the hole is being dug by a 70' trackhole.

:)  

terry

  ----- Original Message ----- 
  From: EL34GUY@aol.com 
  To: isp@bnjcomp.com ; towertalk@contesting.com 
  Sent: Friday, July 08, 2005 5:49 AM
  Subject: Re: [TowerTalk] Pad and Pier for ROHN SSV. Pad and Pier Foundations


  Hi Terry,

  Im not sure what you are putting on top but 14-7 in ssv is a huge tower!!! Im 
putting up sections 7,6,5,4 here and figure I can get over 20 sq ft easy at the 
top and Im using 20 yards of concrete in a pad configuration. Do you really 
need 14-7 for your capacity of antennas? Im just asking a question and not 
trying to be a jerk, 73 and I hope you have a good hernia belt!!

  Mark
  W0NCL
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>