I ran across something which appears to give a quantitative answer to
how far apart to stack beams, whether for the same or different bands.
It involves working out the "radius of effective aperture" of each beam
and adjusting the distance between any 2 beams to be equal to or greater
than the sum of the radius of effective aperture for the 2 beams.
The following are for units of feet, not metres.
First one calculates the "Effective Aperture" (A) for a beam from
A = Wavelength squared X the antenna gain relative to a dipole (ratio
not dB) and divided by 4 Pi
Then one calculates the radius of the effective aperture (R) from
R = A divided by [(H + 2) X Pi]
Where H is the height of the antenna in feet. Lord only knows what the
2 is doing in there.
So, for a 40m beam operating at 7150 with a 4.1 dBd gain at 70 ft
A = 137.7^2 X 2.57 / (4 X 3.14) = 3878 sq ft
R = 3875 / (72 X 3.14) = 17.15 ft
Similarly a 6m beam operating at 51 MHz with a 7.8 dBd gain at 86 ft
A = 179 sq ft
R = 0.65 ft
From which the minimum desirable vertical spacing between a 40m and a
6m beam is:
17.15 + 0.65 = 17.8 ft
So one would, in principle, move the 6m beam up to the 88 ft level and
recalculate.
Similarly, two 6m beams should be spaced about 1.3 ft. Sounds a little
close to me but I don't know much about this stuff.
Is this method actually useful or is it all hogwash?
73, Jim VE7FO
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|