Towertalk
[Top] [All Lists]

Re: [TowerTalk] Building Antennas

To: "'Hector Garcia XE2K'" <j_hector_garcia@sbcglobal.net>,<towertalk@contesting.com>
Subject: Re: [TowerTalk] Building Antennas
From: "AD5VJ Bob" <rtnmi@sbcglobal.net>
Date: Sun, 15 Jan 2006 18:03:12 -0600
List-post: <mailto:towertalk@contesting.com>
I have printed all of your replies and want to thank you
all for taking your time to answer my question.

Now I am in the mode of researching all the answers.
Thanks one and all.

BTW:
What spurred this desire to do my own was I downloaded an
old amateur book from 1959 and was reading the antenna
section.

One thing that hit me between the eyes was that although
computers and rigs have changed drastically.

Antennas are the same. Interested there have been no
advances in antennas, oh sure there have been some  who
say theirs is better different, ect. But when you get
right down to it the "magic" has not changed at all.



  73 fer nw,
Bob AD5VJ

10X# 37210, FP#-1141, SMIRK#-5177
http://www.n5iet.com/
Code may be taking a back seat for now,
but the pioneering spirit that put the code
there in the first place is out front of it all.




> -----Original Message-----
> From: towertalk-bounces@contesting.com 
> [mailto:towertalk-bounces@contesting.com] On Behalf Of
Hector 
> Garcia XE2K
> Sent: Sunday, January 15, 2006 4:51 PM
> To: AD5VJ Bob; towertalk@contesting.com
> Subject: Re: [TowerTalk] Building Antennas
> 
> Bob:
> 
> For what Band  you want to build the antenna ?
> 
> several Vendors offer solutions.
> 
> some very professionals like DXengineering.
> others more portable and basic (fishing poles  hangin
> wires)
> MFJ have parts to complete antenna projects.
> etc etc
> 
> also your local welding supply can provide material
right for 
> your need.
> 
> --- AD5VJ  Bob <rtnmi@sbcglobal.net> wrote:
> 
> > Hi Guys:
> > 
> > I am embarking on my first antenna project of any
significance 
> > (something besides wires).
> > 
> > I am looking at doing a simple direct coaxial fed 2
ele 
> yagi to start 
> > with to see if I can even make this happen.
> > 
> > Can someone please tell me who the supplier's) are for
the proper 
> > weather resistant mechanical parts for these types of
projects?
> > 
> > Stainless Steel screws/nuts/washers
> > Aluminum Plates
> > Tapered Aluminum Tubing
> > Anti-Oxidant coating
> > Sealant Tape for connectors
> > Stainless Hose Clamps
> > Stainless U-Bolts
> > DID I MISS ANYTHING?? :0)
> > 
> > 
> > 
> >   73 fer nw,
> > Bob AD5VJ
> > 
> > 10X# 37210, FP#-1141, SMIRK#-5177
> > http://www.n5iet.com/
> > Code may be taking a back seat for now, but the
pioneering 
> spirit that 
> > put the code there in the first place is out front of
it all.
> > 
> > 
> > 
> > 
> > _______________________________________________
> > 
> > 
> > 
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> >
> http://lists.contesting.com/mailman/listinfo/towertalk
> > 
> 
> 
> Hector Garcia XE2K / XF1K
> Mexicali B.C  DM22
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>