Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rotator Clamps

To: jcowens@netscape.com
Subject: Re: [TowerTalk] Rotator Clamps
From: K7LXC@aol.com
Date: Wed, 1 Mar 2006 09:32:19 EST
List-post: <mailto:towertalk@contesting.com>
Hi, John --
    
    Tnx for your comments on the Orion mast clamps.  After reading the 
comments of two significantly more  engineeringly informed TowerTalkians than 
myself 
(W4EF & N6RK I think  were the ones), I have come to realize that the M2 
clamps are heavy but do not  do a very good job of holding a mast - an 
admittedly 
difficult task, and that  there probably isn't any bolt stretch that 
contributed to the problem. 
 
    With that in mind, how does one propose to keep the  mast from inevitably 
turning in an Orion rotator? Personally I'm going to  continue to pin them 
but even that isn't successful with MonstIR sized antennas. 
 
Cheers,
Steve    K7LXC
TOWER TECH 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>