Towertalk
[Top] [All Lists]

Re: [TowerTalk] [SixClub] Re: Lexan for 6M Antenna

To: <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] [SixClub] Re: Lexan for 6M Antenna
From: "Roger (K8RI) on Six" <50MHz@rogerhalstead.com>
Date: Sun, 25 Jun 2006 23:31:26 -0400
List-post: <mailto:towertalk@contesting.com>
As the original post isn't up here yet...


>>  I'm building a 6 meter yagi and I'm insulating the elements from the 
>> boom.
>> my plans are to use a U bolt with saddle around the boom, then use lexan
>> fastened to the saddle with the 1/2 inch element then fastened to the
>> lexan. The question I have is who is a good source for lexan? I did a
>> search on MCMASTER-CARR web page http://www.mcmaster.com/ for lexan and I
>> found POLYCARBONATE Sheets 1/4 inch thick PN 85805 K28
>> Will this be strong enough? will it hold up under UV ? They have other to
>> choose from, so is their a better choice?
>> Tnx for ur help Ed N5BLZ
>
> Lowes & Home Depot stock Lexan.  Not sure if they stock
> the desired 1/4" thickness.

Our local Ace Hardware has it in 1/4"  I use 2" X 4" pieces as center 
insulators and balun supports for my HF wire antennas. Works well and 
doesn't seem to be bothered by UV.

>
Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com
> The local independent hardware store here carries
> nylon and delrin stock as I recall.  You might try
> a place like that.
>
> Perhaps a plumbing supply house?
>
> -- 
>
> Thanks! & 73, doc kd4e
> http://bibleseven.com
> ______________________________________________________________
> SixClub mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sixclub
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:SixClub@mailman.qth.net
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>