Towertalk
[Top] [All Lists]

Re: [TowerTalk] TowerTalk Digest, Vol 43, Issue 14

To: towertalk@contesting.com
Subject: Re: [TowerTalk] TowerTalk Digest, Vol 43, Issue 14
From: Nick Pair <daweezil2003@yahoo.com>
Date: Wed, 5 Jul 2006 10:19:10 -0700 (PDT)
List-post: <mailto:towertalk@contesting.com>
Re: 20 ft. Ufer CEGE
  The 20 ft. length has seemed to hang up many on its ability to do everything  
needed for lightning protection. That was not the intention of the original 
post. The 20 ft. is the MINIMUM required by the NEC. In the case of JC for whom 
I was discussing he would have 34 ft. assuming 3 in. spacing in from the edge 
of pour and not counting the leads to connect it to the surface of the slab.
  He was also considering additional copper around outside of base in the 
bentonite which is still in the area of dissipation of the Ufer and there for 
not a lot more useful but in no way harmful unless he disturbed soil that the 
base load calculations depended on. Additional grounding would better be 
accomplished by ground rods at LEAST the 8 ft. NEC calls for in a pattern that 
was at least the length of rod spaced from each other and the base all bonded 
to the common point (now a buss with multiple connections) ground connection.At 
rocky sites I have had to have a rock drilling company come in and drill holes 
up to 50 ft. deep and put in screw together ground rods with a enhancing 
additive surrounding them. Also everything on commercial grids are "Cadwelded" 
instead of bolted.(This is not the average do-it your self home project)
  Also the #2 cu is a minimum with #2/0 or #4/0 being the norm on grids.
  A Ufer in no way is a substitute for a ground radial system needed by a 
vertical antenna structure. The number, layout, and type of wires for that is 
another whole thread.
  The ability of lightning to strike in other than the top of the tower is well 
documented and addressed by the various companies the make dissipation devices. 
Most all recommend devices at no more than 50 ft. intervals and some even 
recommend them on insulated guy wires. They cite Field gradient differences 
along sections that create arcing across insulators without strikes degrading 
insulator quality.
   
  Nick 
  WB7PEK

                
---------------------------------
How low will we go? Check out Yahoo! Messenger?s low  PC-to-Phone call rates.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TowerTalk] TowerTalk Digest, Vol 43, Issue 14, Nick Pair <=