Towertalk
[Top] [All Lists]

Re: [TowerTalk] Heavy Guage Copper Wire Source??

To: JC Smith <jc-smith@comcast.net>,TowerTalk <towertalk@contesting.com>
Subject: Re: [TowerTalk] Heavy Guage Copper Wire Source??
From: Red <RedHaines@centurytel.net>
Date: Sun, 09 Jul 2006 12:27:36 -0500
List-post: <mailto:towertalk@contesting.com>
JC caught a great big OOPS!  Dimensions for 8' ground rods are: 8' into 
the ground and 16' apart.

Thanks, JC.

73 de Red

JC Smith wrote:

>Red says:
>==== snip ====
>The optimum pattern of radials for lightning dissipation from a tower or
>vertical antenna is a pattern of 6, equally spaced around the center.
>More won't hurt, but don't help a whole lot for dissipating lightning,
>because 6 will utilize the available capacity of the soil.  This assumes
>that each radial terminates in a ground rod to a depth at least twice
>the length of the radial.
>==== snip ====
>It sounds like you are talking about some short radials or some long ground
>rods.  Can you give us some typical dimensions?  Typical ground rod is 8' so
>are you talking about 4' radials?
>
>Thanks & 73 - JC, K0HPS
>
>
>
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>  
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>