[Top] [All Lists]

[TowerTalk] RE : Sealing cables at PVC exit?

To: <>, <>
Subject: [TowerTalk] RE : Sealing cables at PVC exit?
From: "hermans" <>
Date: Sat, 15 Jul 2006 21:21:23 +0100
List-post: <>
Hello Paul,

Nearby the same upset here.
I use an old plastic paint bucket upside down.
All for nearby nothing, drip loop included ....hi hi 
The best solution I found to keep water out of the conduit.
Good luck.

Jos on4kj os5n

-----Message d'origine-----
De :
[] De la part de Paul Ferguson
Envoyé : samedi 15 juillet 2006 17:55
À :
Objet : [TowerTalk] Sealing cables at PVC exit?

I am using buried 4-inch PVC pipe to run coax and control cables from 
shack to tower base. The PVC come out of the ground, turn horizontal, 
and end a foot or two above the tower base. The cables will exit the 
PVC, take a small drip loop, and get routed onward.

What is the best way to seal the end of the PVC around the cables? I 
thought about using a PVC end cap and drilling holes, but adding a 
future cable would be difficult. I am interested in hearing what 
creative solutions others have found.


TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>