> Hi all,
>
> After some sound advice from the folks on the Topband reflector, I have
> decided to install on or in ground radials for a shunt fed vertical
> (rather than elevated radials). I know that within a year, wire pinned to
> the ground will "disappear".
>
> My lawn however, is dethatched every year. While I can forego this process
> for a year or two, eventually it
We only do that about every 3 or 4 years, but we're considering a mulching
mower.
The dethatcher probably goes down at least a couple of inches unless the
ground is dry and hard.
>will have to be done. The dethatcher is a tow behind unit weighted down to
>about 200 pounds with 1/8" tines >that scratch the grass (and the earth
>too!).
Ours does a lot more than scratch<:-))
> Additionally, the lawn is core areated.
>
That we do every couple of years and it goes down about 4". Not much would
survive that.
> Anyone have experience with this? Buried radials my only option here?
>
I have 600 feet of bare #2 copper and 33 8 foot ground rods out there. I
haven't hit one yet, but the cable is about 4" down. Of course that's a
grounding system and not radials so I have no where near the amount I'd have
for top band.
Good Luck,
Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com
> Thanks,
> John, N9RF
>
>
> ________________________________________________________________________
> Check out AOL.com today. Breaking news, video search, pictures, email and
> IM. All on demand. Always Free.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|