Towertalk
[Top] [All Lists]

Re: [TowerTalk] Designing A Window Frame Antenna?

To: <kd4e@verizon.net>, <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] Designing A Window Frame Antenna?
From: "Clint Talmadge" <unclebudd@bellsouth.net>
Date: Tue, 14 Nov 2006 09:05:43 -0600
List-post: <mailto:towertalk@contesting.com>
How about a Vinyl window with a multi-turn loop around the outside frame, fed 
with a smaller loop installed in the lower sill?  Cap tuned with the cap 
external to the frame so it could be changed for different bands. 

Plus Points = completely hidden 
Minus Points = very directional - non rotateable (though you could have one on 
each wall of the house giving some choices)

Clint - W5CPT
  ----- Original Message ----- 
  From: kd4e 
  To: TowerTalk@contesting.com 
  Sent: Monday, November 13, 2006 10:48 PM
  Subject: [TowerTalk] Designing A Window Frame Antenna?


  If you were to choose, or design, a metal window frame
  for a fixed window to double as a useful antenna how
  would you do it?  Perhaps a 4' x 6' frame.

  No expectations of spectacular performance, just a
  little redundancy should outside antennas be damaged
  during a storm.  Otherwise tied to a scanner or SW
  receiver.  We will have a few acres in a non-deed
  restricted community, but it would be fun to make
  contacts from an "optimized window frame antenna".

  Perhaps merely an exercise in theory ... perhaps
  something useful in a deed-restricted community.

  We live in an all-steel home which keeps RF noise
  and desired signals out and traps RF noise and
  desired transmissions (e.g. cellphone and HT) inside.
  The only RF-porous areas are near doors and windows.

  Our next home will be a monolithic.com dome home,
  mostly concrete shell with a grounded rebar shell.
  A less RF-tight container, but still unfriendly.

  If one were to seek out, or design, a window frame
  compatible with an HF antenna tuner how might one
  best proceed?

  My first thought is to use a metal window frame
  isolated from the rebar cage.  To increase the
  electrical length a metal ribbon could be glued
  to the glass.

  Has lack of sleep and insufficient coffee addled
  me brain?

  -- 

  Thanks! & 73,
  doc, KD4E
  ... somewhere in FL
  URL:  bibleseven (dot) com
  _______________________________________________



  _______________________________________________
  TowerTalk mailing list
  TowerTalk@contesting.com
  http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>