Towertalk
[Top] [All Lists]

Re: [TowerTalk] [TVI-RFI-EMI] Re: Query RFI

Subject: Re: [TowerTalk] [TVI-RFI-EMI] Re: Query RFI
From: ARS NZ3O <nz3o@arrl.net>
Reply-to: nz3o@arrl.net
Date: Sat, 18 Nov 2006 22:40:06 -0500
List-post: <mailto:towertalk@contesting.com>
Didn't see the initial note, but have dimmers in several dozen
fixture controls here and RFI on HF is zero.  Key is using quality
products and having three-wire switches, not two wire.

I have 60 Lutron RadoRa wireless dimmer circuits and
have had zero problems in either direction since moving
from two-wire units to three-wire units.

kd4e wrote:

>> Before someone jumps my case, I am posting here because I know  you 
>> TTalkers are after the really weak ones.
>>  
>> I am told that low halogens are BIG generators of  noise.
>> Is that really true?
>>  
>> On the same note, what about light dimmer  switches?
>>  
>> We are building a new house, and I need to establish some  
>> intelligent positions with my builder right away.
>>  
>> Regards,  Warren; W7WY
>
>
> Many of the energy saving type lamps are generators
> of RFI.
>
> Light dimmer switches are chronic RFI problems --
> the better ones use large contact areas and thus
> are less prone to RFI arcing.
>
> Touch switches are a nightmare!
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>