I'm getting ready to order a new mast clamp for my Orion 2800. Is there
another version I should look for?
Scott N7SS
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of K7LXC@aol.com
Sent: Tuesday, January 09, 2007 6:15 AM
To: richard@karlquist.com; towertalk@contesting.com; donovanf@starpower.net
Subject: Re: [TowerTalk] Rotor Selection Advice Wanted - Heavy Duty
In a message dated 1/8/2007 8:56:34 P.M. Pacific Standard Time,
richard@karlquist.com writes:
> Now I'm confused again. Is the problem with the Orion
that the mast clamp slips, or the rotor breaks? I purchased
a heavy duty Slipp-Nott for my Orion to fix the mast clamp slipping
problem. I thought that would allow me to use the Orion with the MonstIR.
I haven't personally run across a broken Orion although I'm sure there
have been some. The culprit in my experience has been the mast clamp. If
you
can get it to hold the mast, you should be good to go.
Cheers,
Steve K7LXC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|