Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn TB3 or TB4

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Rohn TB3 or TB4
From: Gerald Boutin <infinichron@shaw.ca>
Date: Thu, 11 Jan 2007 19:36:19 -0700
List-post: <mailto:towertalk@contesting.com>
I think this may be the correct link.

http://lists.contesting.com/_towertalk/1998-12/msg00118.html


--
Gerald Boutin, VE6WA 

-----Original Message-----
Link comes up as can not be found on my machine.

Julio, W4HY

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of k1vr@juno.com
Sent: Thursday, January 11, 2007 3:20 PM
To: kc8hz@hotmail.com; TowerTalk@contesting.com
Subject: Re: [TowerTalk] Rohn TB3 or TB4


On Thu, 11 Jan 2007 15:08:00 -0500 "Roger Kissel" <kc8hz@hotmail.com>
writes:
 
> So you're all saying that lubrication should not be used with a Rohn
> thrust bearing ?
<snip>
> For the time being, I have built back the bad races with TIG and am
> going to remachine the grooves and use new balls and see if I can
reuse
the 
> bearing.  If not, I'll put up a STEEL bearing.

An article by K1IR on repairing a "stuck" Rohn TB-3 thrustbearing was
first posted on TowerTalk, and then printed in NCJ. Here's the link to
the TowerTalk posting:
 
http://lists.contesting.com/_towertalk/1998-December/021126.html

Fred Hopengarten K1VR        hopengarten@post.harvard.edu
Six Willarch Road * Lincoln, MA 01773-5105
781/259-0088; FAX 419/858-2421
www.antennazoning.com _______________________________________________

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>