Towertalk
[Top] [All Lists]

Re: [TowerTalk] Hardwired coax

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Hardwired coax
From: Bill Turner <dezrat@copper.net>
Date: Mon, 30 Apr 2007 09:26:33 -0700
List-post: <mailto:towertalk@contesting.com>
ORIGINAL MESSAGE:

On Mon, 30 Apr 2007 12:19:11 EDT, K7LXC@aol.com wrote:


>    The feedline is acting like a feedline, it's  connected to the antenna 
>and the antenna is acting like an antenna so I'm  trying to figure out what 
>would cause the SWR jump. 
> 
>    More input appreciated.
> 

------------ REPLY FOLLOWS ------------

I would do the test using an SWR analyzer and a non-inductive 50 ohm
resistor. I doubt if you would see any significant difference at 14
MHz. 

Bill W6WRT
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>