I don' think uneven ground can be compensated with either box unless you have
several pieces of field test equipment to tune the array and then it will only
hold for one direction.
The best way to deal with uneven ground is to make certain the feed points are
all at the same level AMSL. My 80 meter 4 square elements are set in concrete at
various heights AGL but are within 2" AMSL.
Several AM broadcast stations on hills (nearby Pittsburgh) have element
feedpoints as high as 20 feet to compensate for uneven ground. Yes, they still
use 120 radials!
This is prime tower and antenna growing season!
Be Safe and Enjoy!
73!
Tim K3LR
Mark Robinson wrote:
> My take on it was if you have level ground then the Comtek box will give
> great result. If your ground is very uneven then maybe the Array Solutions
> box will do better - comments?
>
> Mark N1UK G3ZZM
>
> ----- Original Message -----
> From: "Gregg Seidl" <k9kl@centurytel.net>
> To: <TowerTalk@contesting.com>
> Sent: Thursday, 05 July, 2007 8:18 PM
> Subject: [TowerTalk] Comtek boxes
>
> >I too will agree to the value of the Comtek vs. Array Solutions.They both
> > work well but one is just less money which means more money for something
> > else!! Gregg K9KL
> >
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|