Towertalk
[Top] [All Lists]

Re: [TowerTalk] re; exploding concrete

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] re; exploding concrete
From: "Jim Chaggaris" <jimc@pwrone.com>
Reply-to: jimc@pwrone.com
Date: Sat, 15 Sep 2007 20:18:44 -0500
List-post: <mailto:towertalk@contesting.com>
Oh God Gene!  Don't use the Prolec website as a reference for any
transformer of quality.  They fail all the time...

73.
 
Jim N9WW
 
James Chaggaris
President
PowerOne Corp.
1020 Cedar Avenue
Suite 110
St. Charles, IL 60174
Phn: 630-443-6500
Fax: 630-443-6505
Cell: 630-669-2241
www.pwrone.com

 

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Gene Smar
Sent: Saturday, September 15, 2007 8:11 PM
To: Jim Lux; jeremy-ca
Cc: David Gilbert; N7DF; towertalk@contesting.com; Greenacres113@aol.com
Subject: Re: [TowerTalk] re; exploding concrete


----- Original Message ----- 
From: "Jim Lux" <jimlux@earthlink.net>
To: "jeremy-ca" <km1h@jeremy.mv.com>
Cc: "David Gilbert" <xdavid@cis-broadband.com>; "N7DF" <n7df@yahoo.com>; 
<towertalk@contesting.com>; <Greenacres113@aol.com>
Sent: Saturday, September 15, 2007 8:16 PM
Subject: Re: [TowerTalk] re; exploding concrete



>
> Oh yeah, and the other thing that could lead to certain destruction
> would be if you coil the cable.  Run a current through a coil, and it
> tries to expand, and if the current is high enough, the forces will
> exceed the tension strength of the wire and it will come apart.  A
> transient current in a coil can also cause things in or near the coil to
> be squashed and deformed and destroyed.


TT:

     I was exposed to this phenomenon as an engineer with my local electric 
utility company years ago.  My group was responsible for purchasing and 
inspecting all the medium and large three-phase power transformers (5 MVA 
through 350 MVA+) that were installed at the substations around the system. 
These are the brutes that can be as large as a small house.  Besides 
insulation of the various windings (which was paper, BTW), the main thing I 
looked for when I inspected the transformers' cores before they were sealed 
inside the steel tanks was the bracing used to keep the phase windings in 
place under short-circuit currents.  ( For photos of the guts of a medium 
power transformer, see page 6 of 
http://www.geindustrial.com/products/brochures/sst_brochure.pdf .  For a 
view of the bottom of a transformer tank see page 7 ibid.)  As Jim said, 60+

kA of SS current could tear the windings apart as the magnetic fields in 
each phase repelled each other in the close space of the transformer tanks.


73 de Gene Smar  AD3F


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>