Googled galvanized u-bolts. Found this link.
http://www.sabresitesolutions.com/viewItem.aspx?kit=60035&menu=Hardware_Components_click
Hope this helps...
--- k5na@ecpi.com wrote:
From: "Richard L. King" <k5na@ecpi.com>
To: towertalk@contesting.com
Subject: [TowerTalk] Rohn tower U-bolts
Date: Thu, 24 Jan 2008 15:14:53 +0000
I need some Rohn tower galvanized U-bolts to attach accessory plates
to the legs of Rohn 25G and 45G. I think the U-bolt size for both
size tower accessory plates will be the same.
I have been looking around the web for these items and don't seem to
be looking at the right place.
I have several accessory plates that are missing U-bolts or the
U-bolts were previously replaced with the wrong material and are now rusted.
Generally speaking the U-bolts are 3 inches long, 1.5 inch inside
diameter, and threaded about 1.5 inches. I think, but not sure, that
they are about 5/16th in diameter.
Where have other folks found the official replacement for these U-bolts?
73, Richard - K5NA
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|