Towertalk
[Top] [All Lists]

Re: [TowerTalk] antenna sling for tramming

To: Tower Talk <towertalk@contesting.com>
Subject: Re: [TowerTalk] antenna sling for tramming
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Date: Mon, 12 May 2008 13:26:19 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
K7LXC@aol.com wrote:
>  
> In a message dated 5/12/2008 12:25:29 A.M. Pacific Daylight Time,  
> wc1m@msn.com writes:
>
>   
>>> Looping that haul line around the center element with half  hitches
>>> whether above or below the boom should cure this  tendency.    
>>>       
>
>   
>>  Difficult when the antenna has no  center element. It's a 2-el.
>>     
>
>
>     In that case I use a yoke. Loop the  tagline around one element, down the 
> boom and then down the other element  - with both sides tied together forming 
> a sort of triangle. I'd suggest  using some polypropylene since it's 
> relatively stiff and won't tend to  get hung up somewhere as you're unrigging 
> it up on 
> the tower. Or use 2  taglines that go up the element and then tied to the 
> center of the boom so you  can reach it to unrig. One person can handle both 
> taglines without much  problem which is better than having 2 amateurs manning 
> the 
> taglines. One of  them will invariably want to pull too hard. 
>   

That's the main reason I don't like tag lines to the antennas. Even with 
experienced people I like to have another person off to the side where 
they have a good view of the axis in question. Then they can give 
feedback to the person on the tagline(s). Even with the experienced 
things are sometimes not as they seem from that position.  It's sorta 
like driving one of the zero turning radius lawn mowers.  You can 
quickly end up some where you don't want to be.<:-))

73

Roger  (K8RI)
>  

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>