Keith:
Do you have a supplier for the Molex connectors? I
used to use the 8 pin one, but when I redid my coax
and rotor cables I couldn't find the 8-pin ones
anywhere incluing Mouser. Ended up using a pair of
the rubberized 8 pin trailer plugs at both the Ham IV
rotor and the control box.
Tom, WW5L
--- ac9s@mchsi.com wrote:
> Although I subscribe to documenting the wire colors
> - in the rotator's manual,
> I always cut a 6 foot pigtail and use molex
> connectors to join the two ends.
> That way I can quickly disconnect the rotator for
> lightning and it is easy to
> see what color wire connects where. I never take
> the pigtail off the
> controller; I treat it like it is permanently
> connected.
>
> Keith
> AC9S
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
>
http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|