The rotor at the top? Easy, TX has 6 bell housing bolts the IV has 5 bolts
that hold the top to the bottom.
All being equal the IV and TX controls are the same, the old controls have
metal cases and the new controls have plastic cases.
How do I know, got duped by a fellow that sold me a IV as a TX before I knew
the difference between the two. Darn jerk went SK before I got my money
back, so every now and then I go and stomp on his grave.
73 Eric - VE3GSI
P.S. My first Ham IV is still up on the first tower, it is ~25 years old
never been off the tower, works like a charm every contest weekend twisting
a TH6 all over the place.
> -----Original Message-----
> From:
Phil Snyder
> Sent: October-27-08 10:32 PM
> To: WA6RKN; 'towertalk'
> Subject: Re: [TowerTalk] HAM IV vs. Tailtwister
>
> Joe maybe this link can help.
>
> http://www.rotorservice.com/serv3%20identify.htm
>
> Phil
> N9ALH
>
> WA6RKN wrote:
> > Thanks Jack...
> >
> > Already been there....
> >
> > No information at all on how to ID the different rotators. I called
> them as
> > well and the person who answered the phone had no clue and all tech
> support
> > was gone. (Non-existent???)
> >
> > Joe
> > WA6RKN
> >
> > ----- Original Message -----
> > From: "Jack - K4WSB" <k4wsb@arrl.net>
> > Subject: Re: [TowerTalk] HAM IV vs. Tailtwister
> >
> >
> >
> >> go to the mfj/hygain site you'll find all the info there
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|