Towertalk
[Top] [All Lists]

Re: [TowerTalk] HAM IV vs. Tailtwister

To: towertalk@contesting.com
Subject: Re: [TowerTalk] HAM IV vs. Tailtwister
From: WB4UNA@aol.com
Date: Tue, 28 Oct 2008 12:53:20 EDT
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have 2 T2X and they have been up for 10 years and have not  had any 
problems  with them. They have turned  big antennas and small  ones. 
 
Carlus M. Randy Chavis 
WB4UNA since 1970 
432 tru 160  
EM 93  

 
In a message dated 10/28/2008 12:34:45 P.M. Eastern Daylight Time,  
towertalk@n4zkf.com writes:


I  too have a Ham V and a TX2. The Ham V is about 15 years old and works  like
a charm. The TX2 is one year old, came unpainted,
I primed and  painted it and after a year it's about to fall apart
"literally". The metal  is deteriorating to the point
it's all white and chalky.

Not built  like they used to be.

Dave n4zkf


-----Original  Message-----
From:  towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]  On Behalf Of Eric - VE3GSI
Sent: Monday, October 27, 2008 11:26 PM
To:  'Phil Snyder'; 'WA6RKN'; 'towertalk'
Subject: Re: [TowerTalk] HAM IV vs.  Tailtwister

The rotor at the top?  Easy, TX has 6 bell housing  bolts the IV has 5 bolts
that hold the top to the bottom.
All being  equal the IV and TX controls are the same, the old controls have
metal  cases and the new controls have plastic cases.

How do I know, got duped  by a fellow that sold me a IV as a TX before I knew
the difference between  the two. Darn jerk went SK before I got my money
back, so every now and  then I go and stomp on his grave.

73 Eric - VE3GSI

P.S. My first  Ham IV is still up on the first tower, it is ~25 years old
never been off  the tower, works like a charm every contest weekend twisting
a TH6 all over  the place. 


> -----Original Message-----
> From: 
Phil  Snyder
> Sent: October-27-08 10:32 PM
> To: WA6RKN;  'towertalk'
> Subject: Re: [TowerTalk] HAM IV vs. Tailtwister
>  
> Joe maybe this link can help.
> 
>  http://www.rotorservice.com/serv3%20identify.htm
> 
> Phil
>  N9ALH
> 
> WA6RKN wrote:
> > Thanks Jack...
>  >
> > Already been there....
> >
> > No  information at all on how to ID the different rotators.  I called
>  them as
> > well and the person who answered the phone had no clue  and all tech
> support
> > was gone.   (Non-existent???)
> >
> > Joe
> > WA6RKN
>  >
> > ----- Original Message -----
> > From: "Jack -  K4WSB" <k4wsb@arrl.net>
> > Subject: Re: [TowerTalk] HAM IV vs.  Tailtwister
> >
> >
> >
> >> go to the  mfj/hygain site  you'll find all the info  there


_______________________________________________



_______________________________________________
TowerTalk  mailing  list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk  mailing  list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



**************Play online games for FREE at Games.com! All of your favorites, 
no registration required and great graphics – check it out! 
(http://pr.atwola.com/promoclk/100000075x1211202682x1200689022/aol?redir=
http://www.games.com?ncid=emlcntusgame00000001)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>