Towertalk
[Top] [All Lists]

Re: [TowerTalk] what can go wrong with a Bencher YA-1 low pass filter

To: "WW3S" <ww3s@zoominternet.net>
Subject: Re: [TowerTalk] what can go wrong with a Bencher YA-1 low pass filter
From: "Mark Robinson" <markrob@mindspring.com>
Date: Sun, 16 Nov 2008 17:57:31 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have one of those too. I expect to see coils and capacitors inside. Maybe 
one of the capacitors started to fail short circuit or one of the coils 
started to open up. There could be a bad connection inside.

Mark N1UK


----- Original Message ----- 
From: "WW3S" <ww3s@zoominternet.net>
To: <towertalk@contesting.com>
Sent: Sunday, 16 November, 2008 5:47 PM
Subject: [TowerTalk] what can go wrong with a Bencher YA-1 low pass filter


> In the middle of SS this afternoon, started to get very high swr on
> transmit, although receive signals seemed fine, after trying different
> jumpers, etc, isolated it to the Bencher low pass filter....unit is 
> riveted,
> are there any servicable parts inside? What can go wrong?
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>