Towertalk
[Top] [All Lists]

[TowerTalk] fancy switches Re: Antenna Switch Needed

To: lists@subich.com
Subject: [TowerTalk] fancy switches Re: Antenna Switch Needed
From: jimlux <jimlux@earthlink.net>
Date: Fri, 30 Jan 2009 15:07:38 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Joe Subich, W4TV wrote:
> I have to admit to being prejudiced but when top station builders like 
> those at Radio Arkla (OH8X) want reliability and flexibility, their 
> choice is the microHAM Station Master and microHAM single or dual 
> switches. 
> 
> See: www.radioarcala.com/nbspStation/RFSwitching/tabid/367/Default.aspx
> 
> The current building blocks can be used for switching matrixes up 
> to 10 sources (towers) and eight destinations (transmitters).  Each 
> source (tower) can be a switch for up to 10 antennas/feedlines.  
> 
> 73, 
> 
>    ... Joe Subich, W4TV 

I've been thinking about using a small microcontroller with 802.11b on 
it (like from Rabbit Semi) for running remote switches.  Do away with 
the control cables entirely.  I wonder if anyone has any practical 
experience with the RF immunity of 802.11 receivers in strong HF fields 
(e.g. if you've got your little controller sitting near the feed or at 
the base of a vertical, etc.  When you key up, will the 802.11 receiver 
block?)

I was thinking of trying an experiment with just sticking a Linksys 
access point next to the antenna, and seeing if you can still "see" it 
on the network.

The controllers are pretty inexpensive (about $100 ish in moderate 
quantities), and you could easily stick one inside/next to a standard 
switch box, and have the little 2.4 GHz whip stick out.  Then, you 
wouldn't even need a box back at the shack (unless you didn't want to 
use a computer).. just a wireless network connection.

I've tried using wireless ethernet to printer adapters, and they don't 
do well for this application  These widgets like the dlink DP-G301 are 
about $60.  I haven't tried that particular one, but I'm not very 
positive on the overall concept. They really want to see a printer at 
the other end, strobes, acks, etc. it's not like a PC parallel port, 
more of a wireless print server.



I can see it costing $300-400 more at the remote switch end, but you'd 
save on the controller end and on the wires. The wires could be a 
significant chunk of change.

Hmm. probably need to put a gain antenna on the 802.11 because you're 
probably talking hundreds of feet in the usual installation.  OTOH, 
you'd could running the 802.11 at 2mbps.

Once you get that two way link running, too, there's a lot of 
interesting things you could do.. remote antenna tuners, power meters, 
steppir controllers and so forth.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>