On Mon, 31 Aug 2009 12:52:05 EDT, K7LXC@aol.com wrote:
> There may be some benefit with just antennas at the top of the
>tower but where the Phillystran really becomes valuable is when the tower
>is populated with antennas below the top;
I've also seen STRONG interaction between guys and a 3-el SteppIR mounted
just above their anchor points on the tower. This was on a temporary rig. You
can, of course, reduce this a lot with enough egg insulators, but you would
need at least two in each guy wire to stay isolated to 10M. I used
Phillystran for the top guy set on my tower, EHS and insulators for the
bottom three sets.
73,
Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|