Larry - K7SV wrote:
>Some of you may remember my posting about our experience with beverages
>using plastic boxes to house matching transformers. The black plastic boxes
>turned out to be conductive which obviously led to a lot of head scratching.
>
>Well, I've been working a small project using RG-174. I kept finding shorts
>after putting connectors on the ends. Nothing was making sense so it got to
>the point that I cut a foot long piece of the stuff, stripped back about an
>inch of the outer insulated jacket at both ends and pushed the shield away
>from the ends. I then took resistance measurements between the shield and
>the ends (didn't strip back the inner insulation, just stuck the meter probe
>in the end). So I'm still seeing resistance between the shield and the
>center conductor.
>
>On a whim I connected a meter probe to the inner "insulation" at both ends
>of the piece. Sure enough it was a conductive material. I picked up a couple
>hundred feet of this stuff from Mendelson's at Dayton a few years ago. As it
>turns out construction consists of an insulated black outer jacket, stranded
>copper shield, a black conductive material, a light opaque insulation and
>then the stranded copper inner conductor.
>
>My problem obviously existed anywhere that the inner black "insulated"
>material was touching the shield.
>
>This is the first time I've experienced something like this with RG-174.
>Actually as I think about it, the stuff must have really great isolation
>between the center conductor and the braid! I don't think this is typical
>RG-174!
>
>73 de Lar K7SV
>
>
Larry,
How thick is the black conductive layer underneath the stranded coppper
shield? I wonder if that black conductive layer is thin enough to be
equivalent to the foil shield that you see on double-shielded coax (as
on RG-6 or LMR-400) ?
Mike, W4EF...........
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|