Towertalk
[Top] [All Lists]

[TowerTalk] Open wire

To: TowerTalk <towertalk@contesting.com>
Subject: [TowerTalk] Open wire
From: w4lde <w4lde@numail.org>
Reply-to: w4lde@numail.org
Date: Mon, 28 Sep 2009 14:42:11 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
This is off topic but here goes.

I am feeding a 80 meter center feed with open wire, about 100ft feed-line.

Due to some new construction work that is going to start on the back of 
our home this week I am forced to move the feed-line.

The original installation had about 50 ft vertical from the center of 
the dipole and then across and under a raised wood porch and then up to 
a second floor shack.

The porch is going and a new covered screened porch is replacing it.

I have three choices during construction, they are:

1.  Leave the 100' feed-line coiled out in the yard and not operate.  
(Not a great idea)

2.  Cut the feed line down to around 50' which would be temporary but 
then I would have to splice it later after construction.

3.  Coil about 40' near the 4:1 balun, however I am concerned that the 
coiled feed line will act a one big inductor and change and or 
significantly reduce the antenna efficiency.

#3 is the easiest but I am worried about open wire feed-line coiled, 
thoughts please!

73 de
Ron W4LDE
 








_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>