Thank you Martin.
> Date: Sat, 14 Nov 2009 22:13:48 -0500
> Subject: Re: [TowerTalk] Radial Wires VS a wire or screen mesh
> From: martin.s.ewing@gmail.com
> To: w5jv@hotmail.com
> CC: towertalk@contesting.com; antennas@mailman.qth.net
>
> If you have a symmetric installation - a vertical on level ground with
> no near-by obstacles - the ground currents will be purely radial. Any
> wire in the circumferential direction is wasted, since no current
> wants to flow that way. So simple radial wires would require the
> least amount of conductor.
>
> If you don't have complete symmetry, then things are more complicated.
> It is possible that cross connections (or mesh) would help, but maybe
> only a little.
>
> 73 Martin AA6E
>
> On Thu, Nov 12, 2009 at 11:19 AM, John Hensley <w5jv@hotmail.com> wrote:
> >
> > Here's another dumb question: Does anyone know if a functional radial
> > system can be made using fencing wire mesh, say 4 x 4? If unwelded mesh
> > were used and laid down the length of either 1/8 wave or 1/4 wave,
> > shouldn't it work as well as radial wires? Or is it the radial symmetry
> > around the driven pole the key?
> > _________________________________________________________________
> > Hotmail: Trusted email with powerful SPAM protection.
> > http://clk.atdmt.com/GBL/go/177141665/direct/01/
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
>
>
>
> --
> Dr. Martin S. Ewing, AA6E
> Member IEEE, URSI, AAS, ARRL
> Branford, Connecticut
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141665/direct/01/
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|