Towertalk
[Top] [All Lists]

Re: [TowerTalk] Cage Dipole Project Question

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Cage Dipole Project Question
From: K4SAV <RadioIR@charter.net>
Date: Fri, 07 May 2010 08:23:40 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
David J. Sourdis - HK1A wrote:
> If I am not wrong in The Antenna Compendium vol. I or vol. II, there is a 
> wide bandwidth dipole made with only two wires spaced about 6 feet for 160m, 
> wires meet at the ends on each half of the antenna. The author says it spans 
> 1.8-2.0 MHz under 2:1 SWR. A scaled model for 3.75 MHz is under 2:1 for 
> 3.5-4.0 MHz.
>
>   
In the Antenna Conpendium volumn 2, page 106, there is a "Fat Dipole", 
by Robert C. Wilson.  In the table it claims a bandwidth of 500 kHz on 
80 meters (no mention of what the SWR is for that bandwidth).  In the 
text he says the SWR is less than 1.6 from 3.5 to 4 MHz.  EZNEC says the 
2 to 1 SWR bandwidth at 50 ft height and no feedline is 240 KHz.  That 
antenna is just two parallel wires (total length of 118 ft), both 
driven, separated by 3 ft, not connected at the ends.

Here is an antenna that will give you all of 80 meters under 2 to 1 SWR:
http://rudys.typepad.com/ant/files/antenna_broadband_dipole.pdf

Jerry, K4SAV

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>