Towertalk
[Top] [All Lists]

Re: [TowerTalk] Question on how to resurface boom tubing that wasscored

To: "'Mike & Becca Krzystyniak'" <k9mk@flash.net>
Subject: Re: [TowerTalk] Question on how to resurface boom tubing that wasscored by debris...
From: "John E. Cleeve" <g3jvc@jcleeve.idps.co.uk>
Date: Sun, 30 May 2010 20:17:23 +0100
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I use plastic sponge abrasive washing up pads and water to clean off
corrosion and guano. I also wear rubber washing up gloves as well, because
the process is messy.......the aluminium will be clean and then when
reassembled, use clear "Waxoyl" (available in the USA from Land Rover
dealerships) to moderately thickly coat the exterior of the reassembled
joint.....you will then have no further problems from corrosion caused by
the ingress of moisture or bird guano finding its way into the telescopic
joints of your yagi elements...... good luck.   73, John. G3JVC.

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Mike & Becca
Krzystyniak
Sent: 30 May 2010 18:52
To: 'Towertalk Reflector'
Subject: [TowerTalk] Question on how to resurface boom tubing that wasscored
by debris...



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>