Towertalk
[Top] [All Lists]

Re: [TowerTalk] 75ohm cable

To: Carol Richards <n2mm@comcast.net>, Towertalk@contesting.com
Subject: Re: [TowerTalk] 75ohm cable
From: Hector Garcia XE2K <j_hector_garcia@sbcglobal.net>
Date: Mon, 19 Jul 2010 09:12:08 -0700 (PDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Carol

If you want monoband  this is a good option
http://amfone.net/Amforum/index.php?topic=5199.0;wap2

I used it before with  the CATV on my 6m yagi @ 145ft  before change it to 7/8 
heliax,  the run is 250ft, the swr was around 1.2:1 


there are a lot of information how to make the connectors from copper pipes or 
other options.



 J. Hector Garcia XE2K / AD6D
Mexicali B.C  DM22fp
P.O.Box 73 
El Centro CA 92244-0073
USA
http://www.xe2k.net
http://www.dxxe.org




________________________________
From: Carol Richards <n2mm@comcast.net>
To: Towertalk@contesting.com
Sent: Mon, July 19, 2010 8:47:32 AM
Subject: [TowerTalk] 75ohm cable

I am the proud recipent of numerous rolls of 75 ohm, 1/2 in CATV cable. Since 
all of my antennas require 250ft or mor runs this is a real blessing. I have a 
few questions before I start replacing the RG 213. 


1. All of my yagis are 50 ohm, fed through rf chokes to the feed point. Can I 
just connect the 75 ohm and not worry about the small mismatch or do I need to  
use some type of matching network?

2. Are there commercial matching networks to do the job I want that will handle 
1.5kw?

3. I have several articles that allow me to make PL-259's to fit this coax. Is 
there an easier way?



thanks, Carol
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>