Towertalk
[Top] [All Lists]

Re: [TowerTalk] GROUND SYSTEMS

To: <Cqtestk4xs@aol.com>, <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] GROUND SYSTEMS
From: "Gary Schafer" <garyschafer@comcast.net>
Reply-to: garyschafer@comcast.net
Date: Tue, 20 Jul 2010 20:54:22 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Why bother flattening it? It has the same surface area when it is left
round.

73
Gary  K4FMX

> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Cqtestk4xs@aol.com
> Sent: Tuesday, July 20, 2010 8:33 PM
> To: TOWERTALK@contesting.com
> Subject: Re: [TowerTalk] GROUND SYSTEMS
> 
> In a message dated 7/21/2010 12:14:24 AM Greenwich Standard Time,
> k0dan@comcast.net writes:
> 
> Copper  strap is REALLY expensive! Has anyone used welding cable with any
> success  and longevity? Other materials? My #4 grounds are OK, but how to
> get
> a  lower impedance ground system without taking out a second  mortgage?
> 
> I was lucky enough to get some old air filled hardline which I  pounded
> flat and used that.  It works if you only need short runs since it  does
> take
> some time to flatten.
> 
> Bill KH7XS...soon to be plain old K4XS again.
> 
> 
> 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>