Towertalk
[Top] [All Lists]

Re: [TowerTalk] Replacing cable on crankup

To: "Al Williams" <alwilliams@olywa.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Replacing cable on crankup
From: "Barrie Smith" <barrie@centric.net>
Date: Wed, 17 Nov 2010 18:17:12 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
----- Original Message ----- 
From: "Al Williams" <alwilliams@olywa.net>
To: <towertalk@contesting.com>
Sent: Wednesday, November 17, 2010 6:13 PM
Subject: Re: [TowerTalk] Replacing cable on crankup


> Whoa! I once tried to draw a sketch of the crankup winch, cabling, and
> pulleys on a LM472. It didn't turn out very readable. I think that I 
> learned
> that the only thing keeping the tower cranked up is the tension on the 
> winch
> from the cabling.
>
> If that is loosened to attach a replacement cable, wouldn't the tower come
> crashing down?

Well, yes, it would.  However, and this may not be good thinking on my part, 
I was thinking of attempting this with the tower fully retracted.

73, Barrie, W7ALW
>
> k7puc
>
>
> ----- Original Message ----- 
> From: "Alan Swinger" <awswinger@earthlink.net>
> To: "Barrie Smith" <barrie@centric.net>; <towertalk@contesting.com>
> Sent: Wednesday, November 17, 2010 2:33 PM
> Subject: Re: [TowerTalk] Replacing cable on crankup
>
>
>>I just did this w/ a US Tower TX 472 MDP . . . which has a poitive
>>pull-down. In fact, I pd the UST guys to do it - too hard for me. The
>>issues are many, but if a pos pull down you have a loaded spring, so
>>come-alongs are needed to take the pressure off. That said, if your tower
>>does not have the pull-down tension, go for it. - Alan K9MBQ
>>
>>
>> -----Original Message-----
>>>From: Barrie Smith <barrie@centric.net>
>>>Sent: Nov 17, 2010 3:25 PM
>>>To: towertalk@contesting.com
>>>Subject: [TowerTalk] Replacing cable on crankup
>>>
>>>Is there an easy way to replace the cable on a standing, crankup tower?
>>>
>>>It seems to me that it may be possible to attach the new cable to the old
>>>and then thread the new cable through the pullys.
>>>
>>>Or not?
>>>
>>>73, Barrie, W7ALW
>>>_______________________________________________
>>>
>>>
>>>
>>>_______________________________________________
>>>TowerTalk mailing list
>>>TowerTalk@contesting.com
>>>http://lists.contesting.com/mailman/listinfo/towertalk
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> 



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>