Most likely an ATB-34. Should be a manual on line.
73
Jim W7RY
--------------------------------------------------
From: <mikflathead@aol.com>
Sent: Saturday, January 01, 2011 12:22 PM
To: <towertalk@contesting.com>
Subject: [TowerTalk] 1980s Cushcraft A4
>
>
>
> I acquired a late 70 A4 off a friend late dad. The center of the driven
> element is a black insulated material about 2 inches in diameter that the
> U bolts mount to the boom. There are two 1/4 20 tapped holes that I assume
> were to mount the feed line. As you might have determined I do not have
> the instruction manual. Can I use two brass bolts to connect the feed line
> to? How are they making connection to the tubing? It evidently worked as
> this was up for almost 30 years. Thanks Mike
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1191 / Virus Database: 1435/3353 - Release Date: 01/01/11
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|