And is it acceptable to enclose them in a non-conductive enclosure Jim,
even at high power (1500w)? We can get ice 3" thick sometimes!
73 Dwight NS9I
On 2/1/2011 12:14 PM, Jim Brown wrote:
> On 2/1/2011 12:53 AM, Steve Hunt wrote:
>> what you need is a good 1:1 current balun at
>> the ladderline/coax junction.
> You can roll your own for about $10 that will be FAR better than
> anything you can buy at any price. See Fig 48 and the Choke Cookbook in
> http://audiosystemsgroup.com/RFI-Ham.pdf Use the version of the choke
> would with bifilar turns of #12 THHN (ordinary house wire).
>
> 73, Jim K9YC
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|